Sistem Penunjang Keputusan Pemilihan Tipe Smartphone Terbaik Di Toko DST Shop Menggunakan Metode Simple Additive Weighting (SAW) Berbasis Web (Studi Kasus : DST Shop)
Keywords:
Smartphone, Simple Additive Weighting, DecisionAbstract
Smartphone is an electronic device that has become a necessity in everyday life. There are 7 criteria that can be used as benchmarks to determine the best smartphone. Brand, price, RAM, ROM, camera, battery and layer type each have a weight value. To make it easier for customers to determine smartphones, it is necessary to have a decision support system to assist in evaluating cellphones that meet the criteria. In this study, the Simple Additive Weighting (SAW) method was applied as an alternative system that can be used to determine cellphones based on criteria and weight values. The results of the calculation of the Simple Additive Weighting (SAW) method obtained from 7 criteria and 7 weight values are Battery and Rom being the largest weight values, namely 20%, Price 15%, Brand 10%, Camera 10%, RAM 15%, Screen Type 10% Based on the results of the calculation of the Samsung Vivo Y22 being the best smartphone with a value of 85.
References
Siregar, (2014), Sistem Pendukung Keputusan Pemilihan Handphone Bekas Dengan Menggunakan Metode Simple Additive Weighting (SAW), Vol. IV, No. 1, hal. 2301-9425.
Arifin, Zul, dkk, (2016), Sistem Pendukung Keputusan Untuk Pembelian Smartphone Menggunakan Metode Simple Additive Weight (SAW) Dan Fuzzy Associative Memory (FAM), Vol.2, No.1.
Suroso, (2016), Sistem Pendukung Keputusan Berbasis Web Untuk Pemilihan Handphone Menggunakan Metode Simple Additive Weight (SAW), Universitas Sanata Dharma, Yogyakarta.
Asnawati, Indra Kanedi. (2012), Sistem Pendukung Keputusan Kenaikan Pangkat Karyawan Perseroan Terbatas Pelayaran Kumafa Lagun Marina Bengkulu. Bengkulu: Jurnal Media Infotama Vol.8, No. 1 Februari 2012: 118-137
S. W. Mudjanarko, S. Winardi, and A. D. Limantara, “Pemanfaatan internet of things (iot) sebagai solusi manejemen transportasi kendaraan sepeda motor,” Pros. Semin. Nas. Apl. Teknol. Prasarana Wil. X, no. August, 2017, doi: 10.17605/OSF.IO/6UE4B.
A. D. Triono et al., “Utilization of Pedestrian Movement on the Sidewalk as a Source of Electric Power for Lighting Using Piezoelectric Censors,” in 2018 3rd IEEE International Conference on Intelligent Transportation Engineering, ICITE 2018.
A. D. Limantara, L. D. Krisnawati, S. Winardi, and S. W. Mudjanarko, “Solusi Pengawasan Kebijakan Mengatasi Kemacetan Jalan dan Parkir Kota Berbasis Internet Cerdas,” Semin. Nas. Teknol. dan Rekayasa Inf., no. November, pp. 1–6, 2017.
A. D. Limantara, Y. C. S. Purnomo, and S. W. Mudjanarko, “Pemodelan Sistem Pelacakan LOT Parkir Kosong Berbasis Sensor Ultrasonic Dan Internet Of Things (IoT) Pada Lahan Parkir Diluar Jalan,” Semin. Nas. Sains dan Teknol., vol. 1, no. 2, pp. 1–10, 2017.
A. D. Limantara, Y. C. S. Purnomo, and S. W. Mudjanarko, “Pemodelan Sistem Pelacakan LOT Parkir Kosong Berbasis Sensor Ultrasonic Dan Internet Of Things ( IOT ) Pada Lahan Parkir Diluar Jalan,” Semin. Nas. Sains dan Teknol., vol. 1, no. 2, pp. 1–10, 2017.
A. D. Limantara, A. Widodo, S. Winarto, L. D. Krisnawati, and S. W. Mudjanarko, “Optimizing the use of natural gravel Brantas river as normal concrete mixed with quality fc = 19.3 Mpa,” in IOP Conference Series: Earth and Environmental Science, 2018, vol. 140, no. 1.
A. D. Limantara, E. Gardjito, A. Ridwan, E. Sustiyatik, P. Pudijohartomo, and H. L. Sudarmanto, “The Effect of Bioconc Against Compressive Strength of Paving Concrete Combining Natural Materials,” vol. 7, no. x, pp. 89–91, 2018.
A. D. Limantara, E. Gardjito, B. Subiyanto, and S. W. Mudjanarko, (2018). “Modeling Decision Support to Prioritize Pavement Maintenance Activities in Indonesia,” UKaRsT, vol. 2, no. 1.
D. A. Restuti, L. Rifani, A. D. Limantara, and B. Subiyanto, (2017). “Aplikasi Web Mix Desain Beton Berdasarkan Metode DOE (SNI 03-2847- 2002),” UKaRsT, vol. 1, no. 2, pp. 36–50.
E. Gardjito, A. D. Limantara, B. Subiyanto, and S. W. Mudjanarko, (2017). “Pengendalian Mutu Beton Dengan Metode Control Chart (SPC) Dan Process Capability (Six-Sigma) Pada Pekerjaan Konstruksi,” UKaRsT, vol. 1, no. 2, pp. 80–105.
A. Situmorang, A. D. Limantara, B. Subiyanto, and S. W. Mudjanarko, (2017). “Peningkatan Daya Dukung Tanah Dasar Lempung Ekspansif Dengan Stabilisasi Kapur dan Garam”. UKaRsT, vol. 1, no. 2, pp. 68–79, 2017.
W. Arganata, A. D. Limantara, dan Y. Cahyo, (2017). “Analisis Perencanaan Overlay Pada Ruas Jalan Craken-Ngulungkulon Nambak-Ngulungkulon Dengan Bahan ACL Menggunakan Metode Bina”. Jurnal MANAJ. Teknologi. Teknik Sipil, Vol. 2, No. 1, PP. 121–131.
