Analisis Sistem Kompensasi Menggunakan Metode Salary Mapping Adhered Dan Overlapping Pada UKM XYZ
Keywords:
Adhered, Kompensasi, Overlapping, Pemetaan GajiAbstract
This research aims to help provide recommendations and improvements in calculating wages in UKM XYZ using the overlapping method and complying with it. It is hoped that this research can provide a clear picture of the existing incentive system in SME XYZ and provide a strong basis for analyzing and designing a more effective and sustainable incentive structure for the company. The data obtained in this research was obtained from interviews and direct observation at UKM XYZ. The findings obtained in the field indicate that UKM XYZ has not carried out appropriate system improvements, therefore improvements are needed. The results obtained after improving the recovery system using the overlapping method and complying with it were that the total new salary using overlapping was IDR 72,860,000 or an increase of 3.06% compared to the original salary. Meanwhile, by using the compliant method the salary increases by 1.54%. So from these results it can be concluded that the most suitable method to justify the salary structure of SME XYZ is the overlapping method.
References
Fatmarani, S. 2023. Aturan Gaji dan Upah Pekerja UMKM, Simak Ketentuan dan Cara Hitungnya. UKMINDONESIA.ID. Retrieved March 13, 2024, from https://ukmindonesia.id/baca-deskripsi-posts/aturan-gaji-dan-upah-pekerja-umkm-simak-ketentuan-dan-cara-hitungnya.
HRM. (2018). Menentukan Kompensasi Berdasarkan 3P. Samahita Wirotama. https://samahita.co.id/menentukan-kompensasi-berdasarkan-3p/.
Munthe, A., Yarham, M., & Siregar, R. 2023. Peranan Usaha Mikro Kecil Menengah Terhadap Perekonomian Indonesia. Jurnal Ekonomi Bisnis, Manajemen Dan Akuntansi, 2(3), 593-614.
OJK. (2008). UU 20 Tahun 2008. Retrieved March 13, 2024, from https://www.ojk.go.id/waspada-investasi/id/regulasi/Documents/UU_20_Tahun_2008_Usaha_Mikro_Kecil_dan_Menengah.pdf
Peraturan Menteri Ketenagakerjaan Republik Indonesia Nomor 1 Tahun 2017. (2017). Peraturan Menteri Ketenagakerjaan Republik Indonesia Nomor 1 Tahun 2017 tentang Struktur dan Skala Upah. Berita Negara Republik Indonesia Tahun 2017 Nomor 441.
Peraturan Pemerintah Republik Indonesia No 36 Tahun 2021. (2021). Peraturan Pemerintah Republik Indonesia No 36 Tahun 2021 Tentang Pengupahan. Journal of Chemical Information and Modeling, 53(9), 6. http://dspace.ucuenca.edu.ec/bitstream/123456789/35612/1/Trabajo de Titulacion.pdf%0Ahttps://educacion.gob.ec/wp-content/uploads/downloads/2019/01/GUIA-METODOLOGICA-EF.pdf.
Pradana, D. G. 2023. Pengaruh Kompensasi dan Pemberian Bonus Terhadap Kepuasan Kerja dan Kinerja Karyawan PT. Adhi Persada Properti Surabaya. Master: Jurnal Manajemen dan Bisnis Terapan, 2(2), 156-164.
Sarif, R. 2023. Peran UMKM dalam meningkatkan pertumbuhan ekonomi di Indonesia. Maliki Interdisciplinary Journal, 1(1), 68-73.
Tiani, M., Wangsa, Y., Hakim, M. I., Alyadiansyah, B. C., & Kartika, L. 2023. Desain Gaji Pokok menggunakan Metode Point System pada UKM Katering di Kota Bekasi. Syntax Idea, 5(8).
Undang-Undang Republik Indonesia Nomor 20 Tahun. (2008). Undang-Undang Republik Indonesia Nomor 20 Tahun 2008. 1.
