Peningkatan Kompetensi Staf Pengajar Vokasi Melalui Pelatihan Intensif Perancangan Mesin Dengan Sistem CAD Model 3D
Keywords:
Solidworks, Kompetensi Dosen, Sertifikasi CSWA, Metodologi Perancangan, Pendidikan VokasiAbstract
Competency in Computer-Aided Design (CAD) 3D–based design is a vital foundation in modern vocational engineering education. However, a major challenge in practice is the lack of uniform competency standards among teaching staff, where intuitive modeling practices are often found that are not fully defined, resulting in low design data integrity. This program aims to standardize such technical competencies through intensive training based on the Certified SolidWorks Associate (CSWA) curriculum. The program was conducted entirely in an offline setting over 65 instructional hours, covering fundamental topics ranging from design intent philosophy and parametric sketching to assembly validation using standard mates. The results demonstrate a perfect quantitative outcome, with 100% of participants successfully passing the examination and obtaining the international CSWA certification. This success indicates that structured training interventions are effective in equalizing participants’ competencies. The strategic implication of this program is the establishment of a uniform teaching standard among vocational lecturers, which ultimately ensures that graduates possess digital design literacy aligned with modern industrial best practices.
References
Fajri, S. N., & Khumaedi, M. (2016). PENERAPAN MODUL PEMBELAJARAN SOLIDWORKS UNTUK MENINGKATKAN KOMPETENSI MEMBUAT MODEL 3D. https://api.semanticscholar.org/CorpusID:197511660
Irwansyah, I., Asbar, A., & Mubarak, A. Z. (2021). Penguatan kompetensi perancangan mesin melalui pelatihan computer-aided design bagi mahasiswa dan alumni teknik mesin (Strengthening of machine design skills through the computer-aided design training for mechanical engineering students and alumni). Buletin Pengabdian Bulletin of Community Services, 1(2), 44–49. https://doi.org/10.24815/bulpengmas.v1i1.20277
Nurul Amri, A. A., & Sumbodo, W. (2018). Perancangan 3D Printer Tipe Core XY Berbasis Fused Deposition Modeling (FDM) Menggunakan Software Autodesk Inventor 2015. Jurnal Dinamika Vokasional Teknik Mesin, 3(2), 110–115. https://doi.org/10.21831/dinamika.v3i2.21407
Osakue, E. (2015). Teaching Solid Modeling with Autocad. 2015 ASEE Annual Conference and Exposition Proceedings, 26.1488.1-26.1488.17. https://doi.org/10.18260/p.24825
Romli, A., & Haron, H. (2012). Solid Modeler Evaluation and Comparison: Perspective of Computer Science. Jurnal Teknologi. https://doi.org/10.11113/jt.v47.264
S, J., Indrwan, S., Nugraha, N. B., & Sirlyana, S. (2021). PELATIHAN MENGGAMBAR TEKNIK DENGAN SOLIDWORK GUNA MENINGKATKAN KOMPETENSI SISWA SMK NEGERI 3 DUMAI. Community Development Journal : Jurnal Pengabdian Masyarakat, 2(3), 785–790. https://doi.org/10.31004/cdj.v2i3.2595
Sanjaya, F. L., Fatkrurrozak, F., Syarifudin, S., & Wakhyudi, D. (2022). Pelatihan Perancangan Mesin Pada SMK Diponegoro Lebaksiu Kabupaten Tegal Jurusan TKRO Dengan Menggunakan Aplikasi Autodesk Inventor. Dinamisia : Jurnal Pengabdian Kepada Masyarakat, 6(2), 484–490. https://doi.org/10.31849/dinamisia.v6i2.9279
Sari, R. R. S. P., Salahuddin, N. S., Ariyanto, Supriyono, & Fauziah. (2023). OPTIMASI POSYANTEK DESA DAN PELATIHAN MESIN PARUT KELAPA DI DESA JAMALI, CIANJUR, JAWA BARAT. Jurnal Pengabdian Kepada Masyarakat Darma Saskara, 3(2). https://doi.org/10.35760/abdimasug.2023.v3i2.10027
Siregar, W., Napitupulu, R. A. M., & Siagian, P. (2020). Desain dan Manufaktur Model Piston Jupiter MX 135 cc Dengan Menggunakan 3D Printer. SPROCKET JOURNAL OF MECHANICAL ENGINEERING, 1(2), 73–80. https://doi.org/10.36655/sprocket.v1i2.161
Suharso, A. R., Putranto, W. A., Hendartono, A., Kholis, N., Artiyasa, M., & Saleh, N. T. (2023). Pelatihan Penggunaan Perangkat Lunak Design Engineering di SMA Negeri 14 Semarang. Palawa: Jurnal Pengabdian Kepada Masyarakat, 2(1), 7–12. https://doi.org/10.31942/palawa.v2i1.8791
Sukarno, R., Sugita, I. W., & Syaefudin, E. A. (2014). PELATIHAN DASAR-DASAR CAD/CAM/CAE DAN SOFTWARE AUTOCAD UNTUK GURU-GURU SMK BIDANG KEAHLIAN TEKNIK MESIN DI WILAYAH KABUPATEN BEKASI. Sarwahita, 11(2), 122. https://doi.org/10.21009/sarwahita.112.10
Supriyanto, A., Jamaldi, A., & Atmoko, N. T. (2022). PENINGKATAN KOMPETENSI GURU SMK DALAM BIDANG GAMBAR TEKNIK MELALUI PELATIHAN DESAIN. Abdi Masya, 1(4), 178–185. https://doi.org/10.52561/abma.v1i4.184
Wahyu, B., W., & Bonang, E.I., B. (2024). TRANSFORMASI DESAIN ARSITEKTUR: EKSPLORASI METODE DIGITAL DALAM PERANCANGAN. JoDA Journal of Digital Architecture, 3(1), 34–39. https://doi.org/10.24167/joda.v3i1.12649
Widyaningrum, V. T., Hendrawan, Y. F., & Wahyuni, S. (2018). Menggambar Teknik dengan Teknologi 3 Dimensi Bagi Guru dan Siswa SMKN di Bangkalan. Jurnal Ilmiah Pangabdhi, 4(2). https://doi.org/10.21107/pangabdhi.v4i2.4928
Zarkasi, A., Efendy, A., Fitrayudha, A., Muttaqin, A., Sasmito, Wahyudi, M., Adiansyah, J. S., Winarti, D., Novianti, I., & Amelia, D. R. (2024). Transformasi kompetensi Guru SMK dengan land development autodesk civil 3D. Jurnal Pembelajaran Pemberdayaan Masyarakat (JP2M), 5(3), 524–534. https://doi.org/10.33474/jp2m.v5i3.22139
