Studi Perencanaan Struktur Balok dan Kolom pada Rencana Gedung Fakultas Teknik UNIMUDA Sorong
Keywords:
Earthquake Resistance, Faculty Of Engineering Building, Structural Design, Special Moment Resisting Frame (SMRF)Abstract
The Faculty of Engineering at Universitas Muhammadiyah Sorong requires a new building due to increasing academic activities and the growing demand for classrooms, laboratories, and supporting facilities. Since the campus is located in a disaster-prone area influenced by the Sorong fault and the Papua seismic zone, the structural design of the building must incorporate earthquake resistance. This study proposes a building design utilizing a Special Moment Resisting Frame (SMRF) system to provide ductility and resistance against lateral loads. The analysis results indicate that the required structural elements consist of columns measuring 100 cm × 100 cm and beams measuring 70 cm × 100 cm. The spatial distribution of the building is planned based on its elevation, as well as vertical and horizontal zoning plans, to arrange the space on each floor. Considering that the construction site is situated within the Sorong fault zone and the analysis demonstrates that the structure successfully meets the building performance requirements for both lateral and vertical loads, the SMRF system is considered the most suitable structural solution for the Faculty of Engineering Building.
References
Balok, Pelat. 2020. Desain Dan Perencanaan.
Penelitian, Pusat, Pengembangan Perumahan, Permukiman Badan Penelitian, Pengembangan Kementerian, Pekerjaan Umum, and Perumahan Rakyat. n.d. PETA SUMBER DAN BAHAYA GEMPA INDONESIA TAHUN 2017.
Pratama, Adhitya, Januar Oni, Bagus Amandani, Departemen Teknik Sipil, Fakultas Teknik, and Universitas Diponegoro. 2018. “Perencanaan Struktur Gedung Kuliah Fakultas Ekonomi Unnes Semarang.” 7:176–88.
Putranto, E. K. A. Tofani, Pusat Vulkanologi, D. A. N. Mitigasi, and Bencana Geologi. 2014. “KATALOG GEMPABUMI MERUSAK DI INDONESIA TAHUN 1612 – 2014.” 2014(57).
Sirih, Kebon. 2020. “Penetapan Standar Nasional Indonesia 1727 : 2020 Beban Desain Minimum Dan Kriteria Terkait Untuk Bangunan Gedung Dan Struktur Lain Sebagal Revisi Dari Standar Nasional Indonesia 1727 : 2013 Beban Minimum Untuk Perancangan Bangunan Gedung Dan.” (8).
Sni--, Berdasarkan. 2019. Beton Bertulang.
Studi, Program, Teknik Sipil, Fakultas Teknik, and Universitas Muhammadiyah Yogyakarta. n.d. “No Title.”
Tampubolon, Sudarno P. n.d. STRUKTUR BETON I.
Website, Telp Fax. 2019. “Perkembangan Ilmu Pengetahuan Dan Teknologi , Pemeliharaan Dan Penilaian Kelayakan Dan Bangunan Gedung Dan Nongedung Sebagai Revisi Struktur Bangunan Gedung Dan Nongedung ; ( Lembaran Negara Republik Indonesia Tahun.” (8).
