Studi Literatur Review Desain Dan Fluida Kerja Pada Shell And Tube Heat Exchanger
Keywords:
Shell and Tube Heat Exchanger, Review, Modifikasi Desain, Fluida Kerja, Perpindahan Panas, Optimasi TermalAbstract
Shell and Tube Heat Exchanger s are the most widely used type of heat exchanger in the process, energy, and manufacturing industries due to their structural reliability and operational flexibility. However, various studies show that conventional designs still face limitations in achieving high heat transfer performance with controlled pressure losses. This article aims to critically review approaches to improving the performance of Shell and Tube Heat Exchanger s through design modifications and working fluid selection. The method used a semi-systematic approach to experimental studies, numerical studies, and previous reviews discussing baffle innovations, tube geometry variations, the application of porous media, passive enhancement methods, and the use of nanofluids. The results show that design modifications, particularly to the baffles and tube geometry, can improve heat transfer performance by 20–40% compared to conventional configurations. Passive enhancement and porous media approaches enhance flow mixing and turbulence intensity, but are often accompanied by an increase in pressure loss of up to 15–60%. The use of nanofluids and hybrid nanofluids was reported to improve thermal performance by 25–35%, with the main limitations being increased fluid viscosity and pump power requirements.
References
Abbasian Arani, A. A., & Moradi, R. (2019). Shell and Tube Heat Exchanger optimization using new baffle and tube configuration. Applied Thermal Engineering, 157. https://doi.org/10.1016/j.applthermaleng.2019.113736
Babar, H., Wu, H., Zhang, W., Shah, T. R., McCluskey, D., & Zhou, C. (2024). The promise of nanofluids: A bibliometric journey through advanced heat transfer fluids in heat exchanger tubes. Advances in Colloid and Interface Science, 325(December 2023), 103112. https://doi.org/10.1016/j.cis.2024.103112
Basavarajappa, S., Manavendra, G., & Prakash, S. B. (2020). A review on performance study of finned tube heat exchanger. Journal of Physics: Conference Series, 1473(1). https://doi.org/10.1088/1742-6596/1473/1/012030
Blaszczuk, A., & Jagodzik, S. (2020). Heat transfer characteristic in an external heat exchanger with horizontal tube bundle. International Journal of Heat and Mass Transfer, 149, 119253. https://doi.org/10.1016/j.ijheatmasstransfer.2019.119253
Bouselsal, M., Mebarek-Oudina, F., Biswas, N., & Ismail, A. A. I. (2023). Heat Transfer Enhancement Using Al2O3-MWCNT Hybrid-Nanofluid inside a Tube/Shell Heat Exchanger with Different Tube Shapes. Micromachines, 14(5). https://doi.org/10.3390/mi14051072
Córcoles, J. I., Moya-Rico, J. D., Molina, A. E., & Almendros-Ibáñez, J. A. (2020). Numerical and experimental study of the heat transfer process in a double pipe heat exchanger with inner corrugated tubes. International Journal of Thermal Sciences, 158(June). https://doi.org/10.1016/j.ijthermalsci.2020.106526
Gorobets, V., Bohdan, Y., Trokhaniak, V., & Antypov, I. (2019). Investigations of heat transfer and hydrodynamics in heat exchangers with compact arrangements of tubes. Applied Thermal Engineering, 151, 46–54. https://doi.org/10.1016/j.applthermaleng.2019.01.059
Hanan, A., Zahid, U., Feroze, T., & Khan, S. Z. (2023). Analysis of the performance optimisation parameters of Shell and Tube Heat Exchanger using CFD. Australian Journal of Mechanical Engineering, 21(3), 830–843. https://doi.org/10.1080/14484846.2021.1914890
Li, Z. zhong, Ding, Y. dong, Liao, Q., Cheng, M., & Zhu, X. (2021). An approach based on the porous media model for numerical simulation of 3D finned-tubes heat exchanger. International Journal of Heat and Mass Transfer, 173, 121226. https://doi.org/10.1016/j.ijheatmasstransfer.2021.121226
Lotfi, B., & Sundén, B. (2020). Development of new finned tube heat exchanger: Innovative tube-bank design and thermohydraulic performance. Heat Transfer Engineering, 41(14), 1209–1231. https://doi.org/10.1080/01457632.2019.1637112
Mohammadi, M. H., Abbasi, H. R., Yavarinasab, A., & Pourrahmani, H. (2020). Thermal optimization of Shell and Tube Heat Exchanger using porous baffles. Applied Thermal Engineering, 170(September 2019), 115005. https://doi.org/10.1016/j.applthermaleng.2020.115005
Nakhchi, M. E., & Esfahani, J. A. (2020). Numerical investigation of heat transfer enhancement inside heat exchanger tubes fitted with perforated hollow cylinders. International Journal of Thermal Sciences, 147(September 2019), 106153. https://doi.org/10.1016/j.ijthermalsci.2019.106153
Nakhchi, M. E., Hatami, M., & Rahmati, M. (2020). Experimental investigation of heat transfer enhancement of a heat exchanger tube equipped with double-cut twisted tapes. Applied Thermal Engineering, 180(August), 115863. https://doi.org/10.1016/j.applthermaleng.2020.115863
Ocłoń, P., Łopata, S., Stelmach, T., Li, M., Zhang, J. F., Mzad, H., & Tao, W. Q. (2021). Design optimization of a high-temperature fin-and-tube heat exchanger manifold – A case study. Energy, 215, 119059. https://doi.org/10.1016/j.energy.2020.119059
Pan, A., Lu, L., Cui, P., & Jia, L. (2019). A new analytical heat transfer model for deep borehole heat exchangers with coaxial tubes. International Journal of Heat and Mass Transfer, 141, 1056–1065. https://doi.org/10.1016/j.ijheatmasstransfer.2019.07.041
Perumal, S., Sundaresan, D., Sivanraju, R., Tesfie, N., Ramalingam, K., & Thanikodi, S. (2022). Heat Transfer Analysis in Counter Flow Shell and Tube Heat Exchanger Using Design of Experiments. Thermal Science, 26(2), 843–848. https://doi.org/10.2298/TSCI200531077P
Perumal, S., Venkatraman, V., Sivanraju, R., Mekonnen, A., Thanikodi, S., & Chinnappan, R. (2022). Effects of Nanofluids on Heat Transfer Characteristics in Shell and Tube Heat Exchanger . Thermal Science, 26(2), 835–841. https://doi.org/10.2298/TSCI200426076P
Plant, R. D., & Saghir, M. Z. (2021). Numerical and experimental investigation of high concentration aqueous alumina nanofluids in a two and three channel heat exchanger. International Journal of Thermofluids, 9(2021), 100055. https://doi.org/10.1016/j.ijft.2020.100055
Rezaei, M., Mahidashti, Z., Eftekhari, S., & Abdi, E. (2021). A corrosion failure analysis of heat exchanger tubes operating in petrochemical refinery. Engineering Failure Analysis, 119(August 2019), 105011. https://doi.org/10.1016/j.engfailanal.2020.105011
Saffarian, M. R., Fazelpour, F., & Sham, M. (2019). Numerical study of Shell and Tube Heat Exchanger with different cross-section tubes and combined tubes. International Journal of Energy and Environmental Engineering, 10(1), 33–46. https://doi.org/10.1007/s40095-019-0297-9
Silaipillayarputhur, K., & Khurshid, H. (2019). The design of Shell and Tube Heat Exchanger s – A review. In International Journal of Mechanical and Production Engineering Research and Development (Vol. 9, Issue 1, pp. 87–102). https://doi.org/10.24247/ijmperdfeb201910
Sohrabi, N., Hammoodi, K. A., Hammoud, A., Jasim, D. J., Hashemi Karouei, S. H., Kheyri, J., & Nabi, H. (2024). Using different geometries on the amount of heat transfer in a Shell and Tube Heat Exchanger using the finite volume method. Case Studies in Thermal Engineering, 55(January), 104037. https://doi.org/10.1016/j.csite.2024.104037
Tavousi, E., Perera, N., Flynn, D., & Hasan, R. (2023). Heat transfer and fluid flow characteristics of the passive method in double tube heat exchangers: A critical review. International Journal of Thermofluids, 17(January 2023), 100282. https://doi.org/10.1016/j.ijft.2023.100282
Wang, W., Shuai, Y., Li, B., Li, B., & Lee, K. S. (2021). Enhanced heat transfer performance for multi-tube heat exchangers with various tube arrangements. International Journal of Heat and Mass Transfer, 168, 120905. https://doi.org/10.1016/j.ijheatmasstransfer.2021.120905
Zheng, N., Yan, F., Zhang, K., Zhou, T., & Sun, Z. (2020). A review on single-phase convective heat transfer enhancement based on multi-longitudinal vortices in heat exchanger tubes. Applied Thermal Engineering, 164, 114475. https://doi.org/10.1016/j.applthermaleng.2019.114475
