Peningkatan Kehalusan Produk Pada Industri Kecil Cetakan Dengan Pendekatan Eksperimental
Keywords:
Optimasi, Kekasaran Permukaan, Eksperimental, Cetakan, CNC MillingAbstract
Nowadays, the efficiency of CNC milling machines has become one of the crucial issues in the industry in general and especially in small industries. This is due to high utilization but not efficiency. Low machine efficiency has an impact on the financial aspects of the industry. In addition to the issue of efficiency, the uncertainty of machining results is also a major issue because of its impact on time, cost, and large customer trust. Failure to achieve surface roughness results in rework, overtime, replacing materials, and starting the process from the beginning, all of which end in replacing materials and starting the process from the beginning, all of which end in costs. Through joint activities between industry and academia, an experiment was designed to experiment to improve the quality of the product surface and ensure that the product specifications are achieved. With this activity, machining parameters were obtained that could convincingly produce the target surface roughness. A total of 6 specimens were tested, and achieved 100% as targeted.
References
S. Banerjee, S. S. Pawar, T. C. Bera, and K. S. Sangwan, “An Investigation on Reduction of Cutting Energy Consumption Using High Efficiency Machining Strategy,” Procedia CIRP, vol. 105, pp. 198–203, 2022, doi: 10.1016/j.procir.2022.02.033.
J. Wojcicki, M. Leonesio, and G. Bianchi, “Integrated energy analysis of cutting process and spindle subsystem in a turning machine,” Journal of Cleaner Production, vol. 170, Sep. 2017, doi: 10.1016/j.jclepro.2017.09.234.
G. Singh, V. Aggarwal, and S. Singh, “Critical review on ecological, economical and technological aspects of minimum quantity lubrication towards sustainable machining,” Journal of Cleaner Production, vol. 271, p. 122185, Oct. 2020, doi: 10.1016/j.jclepro.2020.122185.
W. Ming, F. Shen, G. Zhang, G. Liu, J. Du, and Z. Chen, “Green machining: A framework for optimization of cutting parameters to minimize energy consumption and exhaust emissions during electrical discharge machining of Al 6061 and SKD 11,” Journal of Cleaner Production, vol. 285, p. 124889, Feb. 2021, doi: 10.1016/j.jclepro.2020.124889.
C. Camposeco-Negrete, “Optimization of cutting parameters using Response Surface Method for minimizing energy consumption and maximizing cutting quality in turning of AISI 6061 T6 aluminum,” Journal of Cleaner Production, vol. 91, pp. 109–117, Mar. 2015, doi: 10.1016/j.jclepro.2014.12.017.
Z. Zhu, D. Buck, X. Guo, and P. Cao, “High-quality and high-efficiency machining of stone-plastic composite with diamond helical cutters,” Journal of Manufacturing Processes, vol. 58, pp. 914–922, Oct. 2020, doi: 10.1016/j.jmapro.2020.09.004.
S. B., M., and C. S.-B., “A Multi-Objective Optimization of Energy, Economic, and Carbon Emission in a Production Model under Sustainable Supply Chain Management,” Applied Sciences, vol. 8, no. 10, p. 1744, 2018, doi: https://doi.org/10.3390/app8101744.
Z. Y. Liu et al., “Energy consumption characteristics in finish hard milling,” Journal of Manufacturing Processes, vol. 35, pp. 500–507, 2018, doi: https://doi.org/10.1016/j.jmapro.2018.08.036.
R. Yin, J. Ke, G. Mendis, and J. W. Sutherland, “A cutting parameter-based model for cost and carbon emission optimisation in a NC turning process,” International Journal of Computer Integrated Manufacturing, vol. 32, no. 10, Art. no. 10, Oct. 2019, doi: 10.1080/0951192X.2019.1667026.
S. Xing, G. Chen, G. Yu, X. Chen, and C. Sun, “Optimization of milling parameters considering high efficiency and low carbon based on gravity search algorithm,” Journal of Intelligent & Fuzzy Systems, pp. 1–19, Sep. 2021, doi: 10.3233/JIFS-210059.
I. O. for Standardization, Tool Life Testing in Milling - End milling. in ISO 8688. Geneve: ISO, 1989. [Online]. Available: https://books.google.co.id/books?id=V1c8yQEACAAJ
Y. T. Wibowo, S. Y. Baskoro, and V. A. T. Manurung, “Toolpath Strategy and Optimum Combination of Machining Parameter during Pocket Mill Process of Plastic Mold Steels Material,” in Materials Science and Engineering Conference Series, in Materials Science and Engineering Conference Series, vol. 306. Feb. 2018, p. 012137. doi: 10.1088/1757-899X/306/1/012137.
G. Zhao, C. Li, Z. Lv, X. Cheng, and G. Zheng, “Specific energy consumption prediction model of CNC machine tools based on tool wear,” International Journal of Computer Integrated Manufacturing, vol. 33, no. 2, pp. 159–168, Feb. 2020, doi: 10.1080/0951192X.2020.1718763.
Y. T. Wibowo, N. Siswanto, and M. Suef, “Response surface methodology approach in achieving multi-response setup optimization in the machining process,” Salud Cienc. Tecnol., vol. 2, no. S2, p. 190, Dec. 2022, doi: 10.56294/saludcyt2022190.
