Evaluasi Kinerja Heat Exchanger 02 Di Pusat Pengembangan Sumber Daya Manusia (PPSDM) Minyak Dan Gas Bumi Cepu
Keywords:
Efisiensi, Evaluasi Kinerja, Fouling Factor, Heat Exchanger, Pressure DropAbstract
Transfer from high temperature to low temperature to have the same temperature, either directly (without separation) or indirectly (the separation). Heat exchanger is a heat exchanger that is useful for changing the temperature and phase of a type of fluid. Therefore, it is necessary to evaluate the performance of heat exchangers. This performance evaluation greatly affects the performen of the heat exchanger. Parameters measured to know performen is the determination of the value of Rd, presure drop, and efficiency of the tool. While the necessary data is taken by direct observation. The purpose of the evaluation was to determine the current performance of the heat exchanger, especially HE-02 at the PPSDM Migas CEPU refinery. From the results of calculations that have been done obtained the results of performance evaluation of heat exchanger 02 is the value of effesiensi 95.275%, the value of faouling factor (Rd) is 0.417 , the pressure drop for the shell is 0.046 Psi and the value of the pressure droop on the tube is 0.005 Psi..
References
Dewi, R. K. (2021). Evaluasi Kinerja Cooler Tipe Shell and Tube pada Unit Kilang Pusat Pengembangan Sumber Daya Manusia Minyak dan Gas Bumi(PPSDM) Migas Cepu. 3(March), 6. ( diakses pada Senin, 15 Agustus 2022)
Sudarni, D.H.A (2019) Cleaning schedule for increased energy efficiencyon heat exchanger process: Sugar plant case study,15.doi:10.1088/17426596/1375/1/012007 ( diakses pada Jum’at,16 Desember 2022 )
Kern, D., Q. 1965. Process Heat Transfer. International Student Edition. McGraw
Hill Book Co: Tokyo
Prayoga, F. R. (2021). Laporan Magang Industri di PPSDM migas cepu. ( diakses pada Rabu, 17 Agustus 2022)
Prihantono, C. F. (2019). Laporan Kerja Praktek Industri, Kerja Praktek di, Evaluasi Efisiensi Furnace-01 pada Kilang Bumi, Pusat Pengembangan Sumber Daya Manusia Minyak dan Gas. 121150061, 1–9. https://doi.org/.1037//00332909.I26.1.78 ( diakses pada Rabu, 17 Agustus 2022)
Tahzanuu, A. (2021). Analisis Neraca Massa dan Neraca Panas di Kilang Pusat Pengembangan Sumber Daya Manusia Minyak dan Gas Bumi. ( diakses pada Jum'at, 19 Agustus 2022)
Wicaksono, C., Wijanarko, E., Simanullang, O. H., & Tahad, A. (2018). Perancangan Eco Heat Exchanger Type 1-2 Shell And Tube dan Pengaruh Jumlah Baffle Terhadap Transfer Panas. Jurnal Chemurgy, 1(1), 27.
Yoga Satria Winasi. (2019). Laporan Tugas Khusus Pt. Pertamina (Persero) RU- VI Balongan Evaluasi Kinerja Heat Exchanger 31 E-102 A/B Pada Naphta Hydrotreating Process Unit.( diakses pada Jum'at, 19 Agustus 2022)
